ProMedia Heritage 2.1 - Enable and Disable Auto On/Off

With the latest firmware update of the ProMedia 2.1 Heritage includes a new feature. You can now enable and disable the Auto-On feature. To do so, follow the instructions below:

NOTE: You will not be able to do this if you have not updated your firmware to version 66. To do so, follow the instructions in this article - ProMedia Heritage 2.1 - USB Firmware Update

1. Press and hold the "Night Mode" button on the included remote control for 5 seconds.
2. Watch the LED on the front of the subwoofer. 
3. LED will flash 3 times if Auto Power is On, and 5 times if it is Off.

For further issues or questions, please reach out to Klipsch Product Support for direct assistance - How To Contact Us for Support