ProMedia Heritage 2.1 - Connecting via Bluetooth

The ProMedia Heritage 2.1 system has the capability of connecting to an audio source device using Bluetooth. Follow these steps below to successfully connect your device to the ProMedia Heritage 2.1.

Step 1 - Enable Bluetooth Pairing

To place the PMH2.1 into Bluetooth pairing mode, press and hold the "Bluetooth" button on the included remote control. If this is successful, you will see a blinking blue LED on the front of the subwoofer

Step 2 - Connect to your Device

On your audio source device, open the Bluetooth pairing menu and search for new devices. 

NOTE: On some systems, two Bluetooth signals may be sent out to your phone; "Klipsch PMH2.1BT" and "Klipsch PMH2.1BT_BLE". Make sure you are only connecting to the "Klipsch PMH2.1BT" and not the "BLE" signal. 

Once the "Klipsch PMH2.1 BT" is connected, you should see a solid blue light on the front of the subwoofer. 

Step 3 - Play Audio

On your source device, begin to play audio to ensure the system is fully connected. 

If you are having issues connecting, please reach out to Klipsch Product Support for direct assistance with your product - How To Contact Us for Support