ProMedia 2.0 - Controls
The ProMedia 2.0 has two knobs on the main speaker that control the whole system. See the images below for more details about the capabilities.
Right Knob
- Rotating the right knob clockwise will increase the overall volume level in the system.
- Rotating the right knob counter-clockwise will decrease the overall volume level.
- A single short press of the right knob will scroll through the three source selections. The front LED on the main speaker will change color depending on which source is selected.
- White - USB Input
- Green - AUX Input
- Blue - Bluetooth Input
- Solid Blue - Device Connected
- Quickly Flashing Blue - In Bluetooth Pairing Mode
- Red - Standby mode
- Holding down the right knob for 3 seconds will either power on the system, or put the system into standby mode.
- Holding down the right knob for 10 seconds will Factory Reset your ProMedia 2.0 system.
- A Factory Reset clears Bluetooth pairing history and user programmed IR commands
Left Knob
- Turning the left knob clockwise will increase the low frequencies in your audio mix.
- Turning the left knob counter-clockwise will decrease the low frequencies in the audio mix.
- A single short press of the left knob will skip the current track you are on and move on to the next track.
- NOTE: This function will only work when using either Bluetooth or USB audio
- A double press of the left knob will go back to the previous track you were listening to.
- NOTE: This function will only work when using either Bluetooth or USB audio
- Holding down the let knob for 5 seconds will force the speakers to enter Bluetooth pairing mode, and search for available devices.
For further assistance with pairing the ProMedia 2.0 via Bluetooth, see our support article here - ProMedia 2.0 - Bluetooth Pairing
Comments
0 comments
Please sign in to leave a comment.