ProMedia 2.0 - Setup and Placement

This article outlines how to setup your new ProMedia 2.0 system, as well as some tips for ideal placement and performance. 

After unboxing the ProMedia 2.0, begin by using the included speaker cable to connect both speakers.

Next, plug one end of the included power cable firmly into the "DC IN" port on the back of the main speaker, and the other end into the outlet.

NOTE: Klipsch recommends connecting the ProMedia 2.0 directly into the wall for best performance

Finally, check the front of the main speaker to see if the LED is illuminated.

For best performance, place the speakers on either side of your computer monitor or screen, between 18 and 48 inches (457-1220mm). Tow in the face of each speaker so it is facing the listening position.