Cinema 400 - Connecting via Analog

The Cinema 400 can be connected to an analog source using a 3.5mm auxiliary (AUX) cable

Note: Analog/AUX cables are not included with the Cinema 400

1. Connect a 3.5mm male to male audio cable (AUX cable) into the analog input on the sound bar
2. Plug the opposite end into the headphones or audio output on the TV
3. Plug the power cord into the sound bar
4. Plug the opposite end into the outlet
5. Set the bar's source to "Analog" by pressing the "ANALOG" button on the remote
   • Note: The color of the source light on the front of the bar will be green