Cinema 600 - Adjusting Surround Sound Independently on Surround 3's

The Surround 3 wireless surround speakers have the option to adjust the volume up or down by 8dB

1. Hold down the ((SUR)) button on the Cinema 600 remote for 3 seconds
   • Note: a flashing orange LED on the front of the sound bar indicates you are adjusting the volume for the left surround speaker
                                  
2. Use the standard volume buttons on the Cinema 600 remote to raise/lower the volume of the wireless surround
                      
3. The LED indicator on the front of the bar will move to the left to indicate less volume, and to the right to indicate more volume
                                     
4. Once the volume for the left surround speaker is set, press the ((SUR)) button on the Cinema 600 remote once to move to the right surround speaker
   • Note: a flashing red LED on the front of the sound bar indicates you are adjusting the volume for the right surround speaker
5. Once you have finished adjusting the volume for both of the surrounds, hold the ((SUR)) button on the remote for 3 seconds to exit surround volume adjustment mode.
   • Note: It will also automatically exit the adjustment mode after 15-30 seconds of no activity