Axiim LINK - Set Up with Compatible LG/Nanocell TV

Below you will find steps on how to set up your Axiim LINK USB transmitter on your compatible LG, or Nanocell, TV

1. Make sure the firmware on your 2019 LG OLED or Nanocell TV is updated to version 03.60.02 or later
   
   • Note: Costco 2019 LG TVs are NOT WiSA ready. However, Costco 2020 models ARE WiSA ready. 
2. Plug each of your Reference Wireless speakers into the wall outlet that is closest to the location of the speaker
3. Connect the Axiim Link to the USB port on the 2019 LG OLED or Nanocell TV
4. A message should appear on the TV screen asking if you want to connect the Reference Wireless speakers
   
   
   
   
5. Select “Yes” to continue
6. After choosing WiSA speakers as the sound out option in the LG TV’s sound menu, select “Search” to look for the Reference Wireless speakers
   
                            
   
   
7. Once all of the speakers have been found, play the test tone for each speaker starting with the first speaker in the list
   
                             
   
   
8. Allow the test tone to play until you have identified where the speaker is located in the room
9. Select “Stop” to stop playing the test tone
10. Select the drop-down arrow to the right of the speaker model to choose the location where the test tone was heard for this speaker
    
                              
    
    
11. Press the OK button on the LG remote to assign the speaker to this location
12. Continue steps 6-10 for all speakers that were found in your system

For additional speaker configuration options, download the Axiim Link app from the Google Play Store if using an Android device or from the Apple App Store if using an Apple device

To view the Axiim Link manual, please see the attached.