Cinema 1200 - How to Check Firmware Versions

You can check the various, current firmware version numbers on your Cinema 1200 by pressing the small surround pairing button under the right end-cap. (shown below)

On the front of the bar, the LED display will show the different firmware versions.

Keep pressing this button to scroll through all the firmware currently active on your device. It should display as follows:

MCU v118 > 
WIFI 1.0.219.0 > 
DSP 5.4 > 
SUR T 82 > 
SUR R 82 > 
SUR L 82 > 
SUB T 03 > 
SUB R 06 > 
HDMI 43

NOTE: You can also check the current firmware versions using the Klipsch Connect app. Simply open the app, connect to your device, then go to "Settings > Product Information" to view your firmware versions. 

All firmware updates are automatically installed as long as your device is connected to the Internet. Most updates are delivered around midnight. Please make sure your device is plugged in and connected to the Internet to receive the latest updates. 

If you are still having issues updating your Cinema 1200, please reach out to Klipsch Product Support for assistance - How To Contact Us for Support