Cinema 1200 - Factory Reset

Performing a factory reset on your Cinema 1200 sound bar will clear out the Bluetooth pairing history, as well as the IR sensor (all previously programmed remotes will be erased). In addition, the factory reset will also erase all saved network/WiFi information on the sound bar. Please see below for instructions.

• To perform a factory reset, simply press and hold the "Power" and "Source" buttons (pointed in the image above) simultaneously for a full 10 seconds
  • Note: You will need to press and hold these buttons on top of the actual sound bar itself. You cannot perform a factory reset using these steps on the included remote control.

Once reset, you will see the front LED display screen show the current sound mode, and then go back to the volume display to indicate that the reset was successful.