Bar 40 - Firmware V51/V19 Update Instructions
Firmware Installation
- Download the latest firmware update file by going to klipsch.com/firmware and choosing Bar 40 from the "AVAILABLE FIRMWARE UPDATES" drop-down menu
- Enter in your soundbar's serial number (found on the back of the soundbar or subwoofer)
- Download and save the file folder to your desktop
- Unzip the file folder and move the “system” folder to an empty USB flash drive that is formatted to FAT32 and is 8GB or less in size
- Power on the sound bar with a short press of the power button on the sound bar
- Insert the USB flash drive into the USB port on the back of your sound bar
- Cycle through the sources by pressing the source button on the top of the sound bar until the source LED turns off and the DOLBY > ((SUR)) > DIALOG > NIGHT mode LED’s light up
- The 4 indicator LED lights will stay on for 10-20 seconds.
- Once the update is complete, the 4 LED indicator lights will start flashing
- Unplug the USB flash drive from the back of the sound bar
- The update has been completed successfully
NOTES
Version: v51 (BT) S/N: 106424819310001 - 106424819319999
Released: 12/13/2019
Region: Global
Change Log:
- Various Bug Fixes
Version: v19 (2.4GHz) S/N: 106424819280001 - 106424819309999
Released: 12/13/2019
Region: Global
Change Log:
- Fixes mute/unmute rapidly subwoofer bug
- Various Bug Fixes
If you need assistance with manually re-pairing your subwoofer after the update, please see our article - Bar 40 - Reconnecting Your Subwoofer
Comments
0 comments
Please sign in to leave a comment.