The Nines II - Wirelessly Pairing the Left and Right Speakers

Your Nines II will arrive paired wirelessly to each other from the factory. Use the supplied CAT 6 cable to connect them in a hardwired configuration, for the highest fidelity audio experience. 

If your speakers become unpaired wirelessly, follow the steps below to re-pair them:

1. Ensure that there is no CAT 6 cable connected to either speaker before performing Step 2.
2. On the secondary speaker, press and hold the Utility button (highlighted below) for 5 to 8 seconds, then let go of the Utility button.  
3. The secondary speaker will then enter 'wireless pairing mode' and sync to the primary speaker.

Note:  If you're still experiencing any issues with the two speakers wirelessly pairing together, please ensure that no strong WiFi signals (i.e. a WiFi router, wireless security cameras) are being transmitted in the same immediate area as the two speakers.  If this is the case, please turn these devices temporarily off during the pairing process.