The Sixes - Amplifier Removal

***MAKE SURE THE POWER IS OFF AND THE CORD IS UNPLUGGED***

Estimated Time to Complete-10/15 Minutes

Tools Required-Philips Screwdriver

1. Unplug the unit from power and let it sit for a few minutes
2. Remove the 6 perimeter screws from around the edge of the amplifier panel
3. Pull the amplifier panel out enough so that you can access the wires
   1. PLEASE NOTE
      1. The amplifier panel may be a bit tight, but it is not glued in
4. Gently pull the amplifier panel out from the speaker
5. Once you have pulled out the amplifier panel, rotate the amplifier panel 90°
6. Remove the white clip
7. Remove the 4 connectors
   1. PLEASE NOTE
      1. Be sure to note the blue wire location

8. Once the amplifier panel is removed, connect the new amplifier panel in reverse order