Surround 3 - Adjusting the Volume

If you find that your Surround 3 speakers are too quiet and need the volume adjusted, please use the instructions below to individually control the volume of each surround.

1. Hold down the surround button (labeled as ((SUR)) on sound bar remotes) for 3 seconds
   
   

   

2. An orange LED on the front of the sound bar indicates you are adjusting the volume for the left surround speaker
3. Use the standard volume controls on the sound bar remote to adjust the volume of the surround
4. Once the volume for the left surround speaker is set, press the surround button on the sound bar remote once to move to the right surround speaker
5. The LED on the front of the sound bar will be red to indicate you are adjusting the volume for the right surround speaker
6. Use the standard volume controls on the sound bar remote to adjust the volume of the surround
7. Once you have finished adjusting the volume for both of the surrounds, hold the surround button on the remote for 3 seconds to exit surround volume adjustment mode

Note: By default, the volume will start at 0 dB and you can adjust the volume up or down by 8 dB

If you find that your Surround 3 speakers are still not very loud, or are experiencing pairing issues, please update the firmware on your Bar 48 sound bar using the following article - Bar 48 - Firmware V30/V83a Update Instructions