1. Klipsch
  2. Sound Bars
  3. Klipsch Sound Bars
  4. Reference Series (R-4B/R-10B/R-20B)
  5. R-4B

Articles in this section

R-4B - Re-Pairing the Subwoofer

  1. Unplug both the sound bar and subwoofer
  2. Wait 5 seconds, then plug them back in
  3. Wait 10 seconds for both the sound bar and subwoofer to completely power up
  4. Use a paper clip to press and hold the recessed button in on the back of the sub for 3 seconds
    • Note: This will be located in the small hole above the "Factory Use" marking

image

  1. Blue LED will blink, indicating pairing mode
  2. On the soundbar, press and hold the mute and source buttons simultaneously for 10 seconds

                R-4b_bar.jpg

  3. Blue LED should then turn solid to indicate a successful pairing

Related articles

Comments

0 comments

Please sign in to leave a comment.