The One Plus - True Wireless Stereo (TWS) Troubleshooting
Important note: to enable TWS mode, you'll need two units of the same exact product model, (in this case, two The One Plus speakers). It is not possible to pair two speakers of different product models in True Wireless Stereo mode.
Enabling TWS mode (instructions):
- Download and install the Klipsch Connect Plus app on your iOS or Android smartphone.
- Designate one of the two speakers as the primary speaker and connect it to your phone via Bluetooth.
- Open the Klipsch Connect Plus app on your phone
- Add the primary speaker to the Connect Plus app (+) from the app's main screen.
- Tap the "Stereo Pair" button within the app and follow the prompt to add the second speaker (+)*.
If you experience issues when pairing two speakers via True Wireless Stereo (TWS) mode, please check the following steps:
- Ensure that both speakers are powered on
- That neither speaker is already paired in a Broadcast/True Wireless Stereo (TWS) session*.
- That your phone's Bluetooth is turned on and the primary speaker is connected to the phone via Bluetooth. You can test this by playing audio from your phone - the audio should play through the primary speaker (which indicates that the primary speaker is paired to your phone's Bluetooth connection).
*If you are experiencing issues with either speaker appearing in the app during the "Stereo Pair" step above, factory reset both speakers: The One Plus - Factory Reset then begin Steps #2 - #5 (above).
Comments
0 comments
Article is closed for comments.