RSB-6 - Reconnecting the Subwoofer

Below, you will find instructional steps on how to reconnect the wireless subwoofer back to the sound bar for the RSB-6 model.

1. Using a paperclip, or a similar small tool, press in the small recessed button located directly below the "PAIR" text on the back of the subwoofer
   
   
2. You should then notice the subwoofer's status LED flashing, indicating it is now in pairing mode
   
   
3. While the LED on the back of the subwoofer is flashing, go to the sound bar and press and hold the "Mute" and "Source" buttons simultaneously for 10 seconds
   
   
4. After holding the "Mute" and "Source" buttons on the front of the sound bar for 10 seconds, you should see the LED on the back of the subwoofer turn solid, indicating it has been successfully paired

If you find that you are still having issues getting the subwoofer to connect to the sound bar, we would recommend updating the firmware on your sound bar. Please see our article, RSB-6 Firmware Update, for assistance on updating the firmware for this model.